Tabla de contenido
Idiomas disponibles
Idiomas disponibles
OPERATION
Set function selector knob to 0 to cancel
DELAY START. The set temperature will be
reset.
Follow the same procedure to adjust the
settings.
End Delay Start.
When End Time is reached, the oven will turn
off as if you set function selector knob to
0. You will hear [end time] beep for about 1
minute. The
and
remaining time 00:00 start flashing. Touch
any control to silence the alarm.
The
and
symbols and the remaining
time 00:00 are flashing until you set function
selector knob to 0. The settings are cleared.
You will not be able to use any other function
until you first set function selector knob to 0.
You can use the oven with the same settings.
Touch
and set DURATION again.
symbols and the
62
Using the roaster.
The roasting process occurs as a result of the
infrared rays emitted by incandescent radia-
tor, which are absorbed by the food.
In order to switch on the roaster you need to:
l Choose one of the heating functions.
l Heat the oven for approx. 5 minutes (with
the oven door shut).
l Insert a tray with a dish onto the appropri-
ate cooking level; and if you are roasting
on the grate insert a tray for dripping on
the level immediately below (under the
grate).
l Close the oven door.
Important!
When roasting it is recommended that
the oven door is closed.
When the roaster is in use accessible
parts can become hot.
It is best to keep children away from
the oven.
Capítulos
Tabla de contenido
Solución de problemas
