Haier HOA-P10PW4X Manual De Uso página 55

OPERATION
Meat probe*
When you connect the meat probe, in each
function selector knob position except
CLEANING and 0, the displays shows
the set temperature (80°C by default).
You will hear the [confirmation 2] beep when
meat probe is detected. Now you can set
the core temperature to be achieved when
heaters will be turned off. Touch twice to set
the desired core temperature (when touched
once you set oven cavity temperature, when
touched twice you set meat probe core tem-
perature). Meat probe core temperature starts
flashing. Use the setting selection knob to
adjust it in the range 30°C – 99°C. T o u c h
to confirm. If you do not confirm within 5
seconds the current temperature setting is
accepted.
When using the meat probe, ECO function
is active and the heaters are turned off
2°C before reaching the desired tempera-
ture to continue cooking with residual heat.
Cooking ends 5 minutes after the heaters
are turned off. The [end time] beep is emitted
and meat probe core temperature and the
symbol flash. Touch any control to silence
the alarm or wait 1 minute. If you do nothing
the appliance will enter standby. Touch
twice and increase temperature to continue
cooking.
The meat probe symbol and core temperature
go out when you unplug the meat probe. You
will hear the [end] beep when meat probe is
unplugged.
*optional
When turn off the oven by setting the func-
tion selector knob to 0 with the meat probe
plugged in the display will show the current
residual heat temperature. The meat probe
symbol and core temperature are not dis-
played.
Recommended meat probe temperature
settings
Type of meat
and
Pork
Beef
Veal
Lamb
Venison
Important! Only use the meat probe recom-
mended for this oven.
55
Temperature
[°C]
85 - 90
80 - 85
75 - 80
80 - 85
80 - 85