Haier HOA-P10PW4X Manual De Uso página 57

OPERATION
Heating functions
Turn the function selector knob to set the
heating function. Depending on the model,
the function selector knob features 8 or 10
heating functions and an OFF (0 setting).
Function selector knob positions
POSITION 0.
You cannot use the
They will not respond and an [error] beep
is emitted.
Clock functions are limited. When you turn
off the oven by setting the function selector
knob to 0 the display will show current oven
cavity temperature. Temperature is displayed,
if it is higher than 60°C.
are displayed.
POSITIONS 1–10.
Please refer to the table on the next page for
details on how the oven operates when you
set the function selector knob to individual
heating functions.
Set the heating temperature
Each heating function has an associated
default temperature. To adjust it at any time
in the range 0-280°C touch
setting selection knob to make the adjust-
ment. No adjustment is allowed in CLEANING
and DEFROST functions. This will be the
new set temperature. If you touch
nothing for 5 seconds, you will not be able to
adjust the temperature. You need to touch the
and functions.
No oven functions
and use the
and do
sensor again. The
the thermostat turns on any of the heaters.
Open the door during operation.
If you open the oven door, if any of the heat-
ing function is activated except PYROLYTIC
CLEANING (door locked), the fan and heat-
ers will turn off until the door is closed. If the
door is open longer than 30 seconds, you
will hear a 15-second [error] beep. Touch any
control to silence the alarm.
57
symbol is shown when