Digital Vnr - JVC AV-32Z25EU Manual De Instrucciones

Using the TV's menu
WARM:
A warm orange/red colour base that creates
the appropriate colour and contrast levels for
watching films.
NORMAL:
A normal white colour base with normal
colour and contrast levels.
Picture Adjustment
You can change the picture settings of each
TINT mode as you like.
CONTRAST:
You can adjust the picture contrast.
2 : lower
3 : higher
BRIGHT:
You can adjust the picture brightness.
2 : darker
3 : brighter
SHARP:
You can adjust the picture sharpness.
2 : softer
3 : sharper
COLOUR:
You can adjust the picture colour.
2 : lighter
3 : deeper
HUE:
You can adjust the picture tint.
2 : reddish
3 : greenish
• You can change the HUE setting (picture
hue) only when the colour system is
NTSC 3.58 or NTSC 4.43. (See
"Specifications" on page 52.)
To return to the default settings in
each TINT mode:
Press the blue button.
• This returns the picture settings in the
TINT mode you have chosen to the
default settings, and stores them in the
TINT mode.
18
PICTURE FEATURES
PICTURE FEATURES

DIGITAL VNR

DigiPure Pro
COLOUR SYSTEM
4:3 AUTO ASPECT
PICTIRE TILT
BACK
TV
OK
D1015-EN
DIGITAL VNR
The DIGITAL VNR function cuts down the
amount of noise in the original picture.
You can choose from the three DIGITAL
VNR function settings of AUTO, MIN and
MAX.
AUTO:
The TV will automatically adjust the level of
the DIGITAL VNR effect to match the
amount of noise in the picture, giving you the
best possible picture.
• If you set the DIGITAL VNR effect too
high it can make the picture less sharp. It
is recommended to use the AUTO setting
if you can.
MIN:
The level of the DIGITAL VNR effect is set
to the minimum. If you set the DIGITAL
VNR function to AUTO but feel that the
sharpness of the original picture has not been
reproduced fully, change the setting from
AUTO to MIN.
• The MIN setting is not suitable for low-
quality pictures which contain a lot of
noise.
MAX:
The level of the DIGITAL VNR effect is set
to the maximum. If you set the DIGITAL
VNR function to AUTO but still notice some
noise, change the setting from AUTO to
MAX.
• The MAX setting is not suitable for high-
quality pictures which contain very little
noise.
AUTO
AUTO