General Information; Area Of Use; Technical Information - hafele DT 100 Instrucciones De Montaje Y De Servicio

Ocultar thumbs Ver también para DT 100:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Attention!
Ö It is essential that you read the "Commissioning" section (see Page
56 ff) of these instructions before commissioning (assignment of keys).

General Information

Area of use

The DT 100 is an electronic door fixtureused principally in the hotel sector.
It is mounted on interior doors with mortise locks complying with
DIN 18 251, and can also easily be retrofitted on the door. For emergency
opening it is recommended that a standard profile cylinder be used.
Depending on the design of the mounting plate on the DT 100, it can also
be mounted on doors whose mortise locks deviate from DIN 18 251.
Please contact your Dialock sales office for situations involving special
doors (FH, RS, etc.).

Technical information

operating mode, up to 740 user keys can be assigneddirectly at the
DT 100 with a special programming ADD key (green). These access
rights can be withdrawn from an authorised user key at the DT 100
using a programming DELETE key (red). Please contact your Dialock
sales office if a different operating mode is required.
and cover) that is mounted on the outside of the door, and an inner
module (mounting plate, battery mounting and cover), that is mounted
on the inside of the door.
Mounting and Operating Instructions
DT 100 - Status: 087.2011 - 732.29.137
35
Tabla de contenido
loading

Tabla de contenido