Operating Instructions, Simple Mode - hafele DT 100 Instrucciones De Montaje Y De Servicio

Operating instructions,
simple mode
Assigning access rights
1. Select the user key to be granted access rights.
2. Present the green programming ADD key to the front of the DT 100.
The green LED flashes.
3. Present the user key to be granted access rights to the front of the
DT 100 within 5 seconds. The green LED is briefly lit. Access rights
are assigned to the user key to be granted access rights.
4. Remove the user key from the reader field.
5. Present each of the next user keys to be granted access rights to the
front of the DT 100 within 5 second intervals for each of them.
After approximately 5 seconds the DT 100 automatically switches
itself off.
Withdrawing access rights
1. Prepare the user key to be deleted and the red programming
DELETE key.
2. Hold the red Deletion Key-stick in front of the display. The red LED
flashes.
3. Hold the user key to be deleted in front of the DT 100. The red LED
briefly lights up.
The user key's access rights have been removed.
Mounting and Operating Instructions
DT 100 - Status: 087.2011 - 732.29.137 59