hafele DT 100 Instrucciones De Montaje Y De Servicio página 62

1. Loosen the setscrew of the door lever on the inside of the door.
2. Remove the door lever from the spindle socket.
3. Press the upper part of the cover against the door to remove the load
from the magnets of the bracket.
4. Place the release lever tool on the cover from above in such a way
that the back edge of the tool engages between the door and cover
and the magnets of the release lever tool are located above the mag-
nets of the bracket.
5. Press the upper part of the release lever tool in the direction of the
door. The upper part of the cover is released from the bracket and tips
forward.
6. Gently raise the lower part of the cover and pull it out of the guiding
rails. The cover is removed from the bracket.
7. Remove the empty batteries from the battery compartment.
8. Insert the new batteries in the battery compartment.
Use correct polarity!
62 DT 100 - Status: 08.2011 - 732.29.137
Mounting and Operating Instructions