hafele DT 100 Instrucciones De Montaje Y De Servicio página 45

6. Remove the door lever from the external spindle.
The DT 100 is adapted for a left-facing door lever.
If the pins have been inserted in the wrong side,
proceed as follows:
Ö Remove the 8 screws in the mounting plate.
Ö Remove the mounting plate from the bracket.
Ö Pull the pins out of the bracket, using pliers if necessary.
Ö Place the mounting plate on the bracket.
Ö Tighten the screws.
Ö Repeat the adaptation process.
Open electronic components!
Ö Do not damage them.
Mounting and Operating Instructions
DT 100 - Status: 087.2011 - 732.29.137 45