hafele DT 100 Instrucciones De Montaje Y De Servicio página 47

Mounting and Operating Instructions
Using suitable pliers, insert the securing ring into the groove of the inner
coupling device. Ensure that the opening of the securing ring does not lie
over any of the upper square-socket pins.
The square socket is now installed.
Mounting the DT 100
The following steps are necessary for mounting the DT 100:
Mounting on wooden doors is described below.
Condensation forming on cold components may damage the DT 100.
Ö Ensure that all components are at ambient temperature.
DT 100 - Status: 087.2011 - 732.29.137 47