Transport And Storage - caprari K+ Serie Instrucciones De Servicio

15.3 DRY INSTALLATION
ventilation. In such cases, it is advisable to mount a sluice valve in both the supply and delivery pipes in
In both installations, there must be a space of at least 1,5 m from the side of the motor cover and it must be
in the system.
The pipes must be supported near the electric pump since this latter must never be used as an
anchoring point.
The forces (F) and moments (M) transmitted by the pipes can act on the suction and discharge
table. Axes x, y and z represent the directions of stress in relation to the carthesian system applied

16. TRANSPORT AND STORAGE

ATTENTION
the motor casing. This is the most stable position and protects the cable against
prevent it from rolling or dropping since this could damage persons, property or the
When the electric pump is stored after a period of use, it must be thoroughly cleaned
and that the oil is at the right level.
If the electric pump is stored for a long period of time, turn the rotor every so often to
prevent its seals and shims from jamming (channel impellers).
the pump is in a perfect condition and conduct the inspections described above
before use.
Caprari S.p.A.
ΣF [N]
K.M150R.. / K.250... / K.D300... / K.D350...
1,5m min
Fig. 4
Fig. 5
ΣM [Nm]
GB
1,5m min
SENSO DI
ROTAZIONE
REACTION
DIRECTION
)
27