Thermador PROFESSIONAL PRO GRAND PROFESSIONAL PRO GRAND PRG36 Manual De Instalación página 22

Backguard Installation
PRG366JG
PRL366JG
PRG364JDG
PRL364JDG
PRG486JDG
PRL486JDG
NOTE: If a backsplash is to be used in addition to a
backguard, install the backsplash first and the backguard
second before sliding range into place.
High Shelf Parts Included
(1) High Shelf top panel
(1) High Shelf front panel
(13) T-20 Torx Stainless screws
(16 or 14) T-20 Torx drill point screws
(1) Installation Guide
Low Back Parts Included
(1) Low Back panel
(9 or 8) T-20 Torx stainless screws
(8 or 6) T-20 Torx drill point screws
(1) Installation Guide
Tools Needed
T-20 Torx head screwdriver or drill
Protective Work Gloves
WARNING:
To reduce the risk of fire or injury to persons, check to
make sure all packaging has been removed from
accessory devices before use.
English 20
AVAILABLE FOR THESE PRO GRAND
Pro Grand 36" Gas Range 6 Burner
Pro Grand 36" Gas Range 6 Burner - LP
Pro Grand 36" Gas Range 4 Burner Griddle
Pro Grand 36" Gas Range 4 Burner Griddle - LP
Pro Grand 48" Gas Range 6 Burner Griddle
Pro Grand 48" Gas Range 6 Burner Griddle - LP
®
GAS MODELS:
WARNING:
Fingers or hands could get pinched when installing the
backguard. Severe injury could result. Use extreme
caution and wear thick protective gloves to avoid
potential laceration to finger or hand while sliding the
backguard down onto the range.
CAUTION:
The High Shelf can get very hot! DO NOT place the
following items on top of the High Shelf:
• plastics or containers that can melt
• flammable items.
• a total load over 30 pounds (13.6kg)
High Shelf
Low Back
F 19: H
IGURE
S & L B F
IGH HELF OW ACK RONT
V
IEW