Salva IVERPAN FC-18 Instrucciones De Usuario página 93

6.1.2. Operating Mode Selection and Display
Adjustable Value Selection
6.1.2.1.
6.1.3. Programmed Default Value Display
6.1.4. Timer Selection and Setting
Usuario_Iverpan2006_(c-f-i)011210
This consists of the following elements:
Key (4) - when it is pressed, the machine changes to chiller
operating mode. Chill only. Key (5) - when it is pressed, the
machine changes to controlled fermentation operating mode,
in other words, conservation plus fermentation. Key (6) - when
it is pressed, machine changes to fermentation operating
mode.
Key (7) - when it is pressed, the machine changes to sleep
operating mode. (Delaying fermentation).
The following keys are used to select the required program-
ming values. These values appear on the LCD display and may
be numerical or alphanumeric characters.
The keys are:
Key (2) - when it is pressed, digits are added to the adjusted
variable. Key (3 ) -when it is pressed, digits are subtracted
from the adjusted variable.
Key (1) -when it is pressed, the data is confirmed and it mo-
ves one step forward in the programming routine. Its function
is equivalent to using the < ENTER > key.
Key (8) , - when it is pressed, the messages corresponding to
all default values programmed for the selected operating mode
are shown on the LCD display.
Key (8) + Key (3) - when they are pressed simultaneously, the
variables required for setting the internal timer are shown on
the LCD display.
-93-
salva