Technical Data; Machine Data - Stiga TITAN 540 D Instrucciones De Uso

1 GENERAL
This symbol indicates CAUTION.
Serious personal injury and/or damage
to property may result if the
instructions are not followed carefully.
You must read these instructions for use
and the accompanying pamphlet
"SAFETY INSTRUCTIONS"
carefully, before starting up the
machine.
Contaminants must not enter the
hydraulic system or the fuel system.
This causes serious damage to
components of the systems.
1.1 SYMBOLS
The following symbols appear on the machine.
They are there to remind you of the care and atten-
tion required during use and maintenance.
This is what the symbols mean:
Caution!
Read the instruction manual and the safety
manual before using the machine.
Caution!
Watch out for discarded objects.
Keep onlookers away.
Caution!
Always wear hearing protectors.
Caution!
The machine, equipped with original ac-
cessories, must not be driven in any direc-
tion on slopes with a gradient greater than
10º.
Caution!
Risk of crushing injuries. Keep all body
parts away from the articulated steering
when the engine is running.
Caution!
Risk of burn injuries. Do not touch the si-
lencer/catalytic converter.
Caution!
Before starting repair work, remove the
ignition key from the machine.
ENGLISH
Caution!
Risk of crushing injuries, rotating fan.
Risk of crushing injuries, rotating belt.
Risk of crushing injuries, mechanical
parts.
1.2 REFERENCES
1.2.1 Figures
The figures in these instructions for use are num-
bered 1, 2, 3, etc.
Components shown in the figures are marked A, B,
C, etc.
A reference to component C in figure 2 is written
"1:C".
1.2.2 Headings
The headings in these instructions for use are num-
bered in accordance with the following example:
"1.3.1 General safety checks" is a subheading to
"1.3 Safety checks" and is included under this
heading.
When referring to headings, only the number of the
heading is normally specified. E.g. "See 1.3.1".

2 TECHNICAL DATA

2.1 MACHINE DATA

Engine output, kW
Drive PTO
Speed, km/h
Weight, kg
Height, mm
Length, mm
Width, mm
Engine oil, volume
Engine oil, grade
Hydraulic oil
Oil
wheel motors
Ambient temperature Down to -20°C.
Fuel
Tank volume
*With protective fram folded down
Original instructions for use
EN
540 740
17.4 22.2
Hydraulics
0-20 0-20
714 731
1963/1475*
2435
1084
3.4 litres 3.6 litres
See 5.3
20 litres SAE 10W-30
When using in winter ISO
VG 46. See 2.2.1
4x0.08-0.09 litres GL4/5
75W-90
Diesel (EN590:96)
42 litres
79