Safety Information; Setting Up - Unold 28811 Manual De Instrucciones

safety information

1. Please read the operating instructions thoroughly and keep
them for future reference.
2. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
3. Children should be supervised in order to ensure that they do
not play with the appliance.
4. Connect the appliance only to an AC power supply with the
voltage indicated on the rating plate.
5. Never leave the appliance unattended when it is connected to
the wall socket. Keep the appliance out of reach of children.
6. The appliance may only be used to prepare coffee, never for
heating any other liquid.
7. The appliance may never be immersed in water or other liquids
nor cleaned in the dishwasher.
8. Place the appliance on a dry, even and firm surface. Never
place it on hot or metal surfaces.
9. The appliance is designed for indoor use only and may not be
covered during operation.
10. Use the appliance with original accessories only. The use of
accessories of other manufacturers or brands can damage the
appliance or lead to hazards for the user.
11. The lead cable may not get in contact with the hot parts of the
appliance. Do not touch the hot parts of the appliance.
12. Do not pull on the lead cable. Make sure that the lead cable
does not hang over the edge of the worktop. Do not bend the
lead cable or wrap it around the appliance.
13. Always disconnect the lead cable from the wall socket pulling
on the plug, never on the cable.
14. This appliance is intended for domestic and similar use such
as:
staff kitchen areas in shops, offices and other working
ƒ
environments;
agricultural enterprises;
ƒ
the manufacturer shall not be liable in the event of improper assembly, improper or incorrect use or repairs carried out by unauthorised third
parties.

setting uP

Each appliance is thoroughly tested before delivery. After the test the appliance is scrupulously cleaned. Nevertheless, there might be
remains of coffee powder or water inside the appliance.
1. Unpack the appliance, remove any transport safety devices
and check if all accessories have been delivered according to
the list of accessories (page 7). If possible, keep the packaging
in order to use it in case the appliance needs to be sent to the
after-sales service.
2. Clean all detachable components as described in the chapter
„Cleaning". After that assemble the appliance completely.
3. Remove the water tank and fill it with fresh water up to the
mark. Do not use milk, carbonated water or other liquids.
Reinsert the water tank and fit the lid.
Note:
The tank should be removed to be filled with water, in order
to prevent water from getting into the coffee beans container.
4. Open the coffee beans container, wipe it out with a dry cloth,
fill it with coffee beans and fit the lid.
Note:
For maximum coffee taste use fresh, dry coffee beans only.
Do not use coffee beans with a high fat content as the coffee
powder may then clog the grinder. Make sure the coffee
22
by clients in hotels, motels and other accommodation
ƒ
facilities;
bed and breakfast accommodations and holiday homes.
ƒ
15. Never operate the appliance without water. Always use fresh,
cold water to prepare coffee and fill the water tank only up to
the MAX mark.
16. Never switch the appliance on if it is without water.
17. Some components of the appliance like the steam nozzle or
the frother become hot during operation. Do not touch hot
components.
18. Please consider the instructions in the chapter „Cleaning and
Care".
19. If the appliance is not going to be used for an extended time,
clean all detachable components before storing it.
20. Never pour water into the coffee beans container, as this
might damage the grinder.
21. Opening the lateral cover of the appliance triggers the safety
switch. If the cover is opened during operation, the appliance
is automatically switched off.
22. After use and before cleaning turn the appliance off using the
EIN/AUS [ON/OFF] switch on the rear and disconnect it from
the wall socket.
23. Check the plug and lead cable regularly for wear and damage.
In case the lead cable or other parts appear damaged, please
send the appliance or the cable to our after-sales service
for inspection and repair (for address, see warranty terms).
Unauthorised repairs can constitute serious risks for the user
and void the warranty.
hot water and steam can cause scalding! Direct the
frother either into a jug or towards the drip tray.
Freshly brewed coffee is very hot. Please be careful
when handling cups filled with hot coffee.
beans container does not contain any metal parts or other
hard objects which could damage the grinder. Do not grind
any other type of beans or fruit in the coffee beans container.
5. Plug the lead cable into the socket on the appliance first
and then connect it to a wall socket that corresponds to the
indications on the rating plate.
6. Open the lateral cover and check if the brewer assembly and
the coffee grounds container have been inserted correctly.
Otherwise ventilation will not be possible. First insert the
brewer into the appliance until it latches into place, then
insert the coffee grounds container.
7. Close the lateral cover. (The lateral cover is fitted with a
safety switch. The fully automatic coffee machine can only
be switched on when the lateral cover has been closed
correctly.)