SMA FUEL SAVE CONTROLLER 2.0 Instrucciones De Uso página 40

6 System Monitoring
Using the scrollbar
If not all messages can be displayed on the user interface, a scrollbar appears on the Alarm list page. You can
only use this scrollbar by means of the arrow keys.
• To call up messages recorded at an earlier time, press the up row key.
• To call up messages recorded at a later time, press the down arrow key.
Procedure:
1. To do this you must be logged in as Installer: Go to the menu Plant Overview via the page and menu selection.
2. Choose Operations > Alarms via the page and menu selection.
3. Select the required message types. To do this, activate the checkboxes displayed below all the required message
types, and deactivate the checkboxes for all message types that are not required.
Example: Calling up errors and warnings
Finally, in order to display the errors and warnings, perform the following steps:
• Activate the Errors and Warnings checkboxes.
• Deactivate the Info, Battery events, System events, Genset events, PV events, and Meas events
checkboxes.
4. Processing reported errors:
• Ascertain and remove the cause of the error. To do so, contact the SMA Service Line (see Section 12,
page 103).
• Once the cause of the error has been eliminated, acknowledge the error message. To do so, select the
[Acknowledge] button.
5. Ascertain the causes of reported warnings and take corrective action. To do so, contact the SMA Service Line (see
Section 12, page 103).
6. To acknowledge reported warnings or events, select the [Acknowledge] button.
40 FSC20-BA-xx-20
SMA Solar Technology AG
User Manual