Cleaning And Maintenance - Chicco Eletta comfort Instrucciones De Uso

t is maximum safety, the two buckle tabs have been de-
eat signed so as to prevent the locking of a single tab, or
one tab at a time.
ety Diag. 33 – To tension the safety harness of the Child
Car Seat, pull the adjustment strap G of the harness,
ons until the harness straps adhere to the child's body
correctly.
WARNING! Do not over-tighten the harnesses: If
you can insert one finger between the harness and
dju- your child's shoulders, it means that it is tightened
correctly.
tly, WARNING! Check that the harness is not twisted.
the

CLEANING AND MAINTENANCE

All cleaning and maintenance operations must only
osi- be carried out by an adult.
ton HOW TO CLEAN THE FABRIC COVER
me The fabric cover of the Child Car Seat can be removed
ess and cleaned by hand or in a washing machine at 30°C.
em Please refer to the following care label symbols for in-
structions on how to clean the fabric cover:
the
Never use abrasive detergents or solvents. Do not
the spin the fabric cover, let it dry without wringing. To
t. remove the fabric cover, it is first necessary to re-
to move the safety harness. To carry out this operation,
aps. see the points described from Diag. 20 to Diag. 23 in
and the "HOW TO ADJUST THE HEIGHT OF THE SAFETY
ho- HARNESS" paragraph:
Once the safety harness has been removed from the
aps backrest:
on Diag. 34 – Take off the fabric cover from the seat of
the Child Car Seat, removing the shoulder straps and
will the two harness straps from the respective holes, lo-
ted cated on the fabric cover.
To replace the fabric cover and harness straps, pro-
ugh ceed as follows:
oles Diag. 35 – Fit the fabric cover on the seat of the Child
tes Car Seat, inserting the two harness straps inside
the respective holes, located on the corresponding
the points of the fabric cover.
Then carry out the operations described from
ess Diag. 26 to Diag. 29, in the "HOW TO ADJUST THE
HEIGHT OF THE SAFETY HARNESS" paragraph.
. WARNING! Check that the harness is not twisted.
Car HOW TO CLEAN THE
HE PLASTIC OR METAL PARTS
ph, Clean the plastic and coated metal parts only with
a damp cloth. Never use abrasive detergents or sol-
vents.
ing The movable parts of the Child Car Seat must not be
est lubricated.
s in
kle
abs
ure
Machine washable at 30°
Do not bleach
Do not spin dry
Do not iron
Do not dry clean
CHECKING THE CONDITION
OF THE COMPONENTS
It is recommended to check regularly the condition
of the following components to ensure that they are
not damaged or worn out:
• Fabric cover: Check that the padding does not
come out from the seams. Check the condition
of the seams: they must always be intact and
undamaged.
• Harness: Check that the fabric weft is not fra-
yed or the harness strap worn out in the parts
corresponding to the adjustment strap, crotch,
shoulders and harness adjustment plate.
• Plastic parts: Check that the plastic parts are not
worn out, damaged or faded.
CAUTION! If the Child Car Seat is deformed or worn
out, it must be replaced: it may no longer comply
with the original safety standards.
STORING THE PRODUCT
When it is not fitted into the car, it is recommended
to store the Child Car Seat in a dry place, away from
sources of heat and to protect it from dust, humidity
and direct sunlight.
PRODUCT DISPOSAL
When the Child Car Seat no longer complies with the
original safety standards, stop its use and dispose of
it at an appropriate collection point. Dispose of the
product as laid down in the environmental norms in
force in the Country of use.
9