Honda FRC800 Manual De Explicaciones página 42

6.Wipe dirt from the inside of the air cleaner cover using a moist rag.
Remove the five 5×16.5 mm pan screws, and remove the pre-air
cleaner guide and case.
Clean the air cleaner cover and case.
Assemble the pre-air cleaner case and guide by aligning the tab of
the case with the groove of the case cover.
7.Reinstall the filter elements and grommet, and tighten the wing nut.
Install the air cleaner cover, and tighten the wing nut.
5 x 16.5 mm
PAN SCREW(5)
PRE-AIR
CLEANER
GUIDE
PRE-AIR CLEANER CASE
SERVICING YOUR TILLER
AIR CLEANER COVER
PRE-AIR CLEANER
CASE COVER
GROOVE
TAB
WING NUT
WING NUT
GROMMET
PAPER
ELEMENT
FOAM
ELEMENT
39