Attendant Foot Lock (Hub Lock) - Ki Mobility Little Wave FLIP XP Manual De Instrucciones Y Garantía

V. SET UP & USE OF YOUR WHEELCHAIR
Z. Attendant Foot Lock (Hub Lock)
a. Remove both wheels from wheelchair (see Section W.).
b. Using 24mm wrench, loosen (but do not remove) both axle sleeve nuts (Fig. 58:A).
c. Twist axle tube to desired angle. If foot tilt is installed, it is not recommended to make large
changes to foot pedal as this can over overstress the cables attached to the foot tilt.
d. Retighten nuts and replace wheels.
e. Ensure rear frame still folds properly for storage.
Fig. 58
A
47