Hand Tilt Mechanism - Ki Mobility Little Wave FLIP XP Manual De Instrucciones Y Garantía

V. SET UP & USE OF YOUR WHEELCHAIR
Q. Hand Tilt Mechanism
1. Tilting Seat Frame
a. Squeeze trigger (Fig. 37:A).
b. While keeping triggers depressed, rotate seat frame to desired position.
c. Release trigger to lock into place.
2. Cable Adjustment
a. Unlock jam nut (Fig. 38:A) from cable adjuster body (Fig. 38:B) using a 10mm and 3/8" open
ended wrench.
b. Twist adjuster body in or out until slack in cable is eliminated, but also such that the mech
lock lever (Fig. 38:C) is still fully open.
c. Verify function of cable. Mech locks should slide freely when triggers are pulled and be fully
locked when triggers are released.
d. Once proper adjustment is obtained, tighten jam nut against adjuster body to lock.
A
Fig. 37
Fig. 38
C
34
A
B