SKYLOTEC Jackpod Davit Instrucciones De Uso página 27

To install the sleeve assembly, remove the mounting bolts from the Sleeve Assembly, install the sleeve
into the Base Frame as shown in Figure 8, and tighten Mounting Bolts being careful not to over-tighten
the bolts and crush the tubes.
EN
Figure 8, Assembled Base Frame / Sleeve
The Sleeve Assembly may be moved side to side if required to adjust the davit position around site
obstacles.
1905 mm (75 ")
1371,6 mm (54 ")
Figure 7, Range of Opening Sizes for Jackpod Base Portable
By angling the base legs, position the base around the opening being entered so as to achieve the best
access to the opening for the entrant, and the best working position for the attendant.
Level the Base Assembly using the 4 Leveling Screws, adjusting the base such that the legs angle slightly
upwards as the go from back to front.
27