SKYLOTEC Jackpod Davit Instrucciones De Uso página 25

3.2 Compatibility of connectors
Connectors used to connect components in the system must be compatible with each other to ensure
sufficient strength and eliminate the risk of accidental disengagement or rollout during use. Connectors
EN
supplied with products designed, manufactured, and/or approved by Skylotec will meet applicable com-
patibility requirements for connectors. Any connectors not supplied by Skylotec GmbH Products MUST
BE approved by a Qualified Person, and installed, inspected, and used according to the respective ma-
nufacturer's instructions.
3.3 Full body harness
Use only a full body harness designed, tested, and approved for fall arrest when connecting a person to
this winch. Body belts or straps do not provide adequate support to the body to prevent serious injury or
death in the event of a fall.
3.4 Fall protection
Activities involving working at heights require the use of equipment to protect the worker in the event of a
fall. Suitable fall protection must be provided as required by applicable local regulations when using the
Jackpod Davit System and related equipment.
3.5 Confined space safety
When the Jackpod Davit Arm is used as part of a system involving work in a confined space, always follow
an approved confined space safety plan meeting all local regulations.
3.6 Swing angle
Care must be taken at all times to minimize the potential for swing fall when working at heights. At no
time should the angle of a winch or SRL line exceed 5 degrees with respect to the vertical (see Figure 5).
Anchorage
Lifeline
> max. > max.
Figure 5, Maximum Swing Angle
4.0 Jackpod Davit system setup and operation
The Jackpod Davit Arm is designed for use in conjunction with various accessories to meet different
requirements. These may include winches, davits, self-retracting lifelines (SRL's), energy absorbers, and
full-body harnesses. All installations must be approved by a Qualified Person.
4.1 Set-up / installation of mounting bases
The Jackpod Davit Arm is designed for use in many types of bases depending on the given application,
including service vehicle tow hitch mounted bases, barrel mount bases, counterweighted bases, and
various styles of clamp-on and permanent mount bases.
25