Before Using The Appliance The First Time - Unold 28465 Instrucciones De Uso

BEFORE USING THE APPLIANCE THE FIRST TIME

Before brewing coffee for the first time, please run one or two brewing cycles
with water only to remove any residue from the manufacturing process. We also
recommend running one brewing cycle without coffee if the appliance has not
been in use for an extended period.
1. Carefully unpack your coffee maker. Keep packaging materials away from
children - danger of suffocation!
2. Check to make sure that all accessories are present.
3. Clean all parts with a damp cloth, as described in the chapter "Cleaning
and care".
4. Check to make sure that all parts are assembled correctly and the appliance
is stable.
5. Connect the appliance via the power cord to the power supply (230 V~,
50 Hz).
6. Open the lid of the appliance.
7. Fill the water tank with clear, cold water to the "Max" marking. Please note
that the water tank has a small hole at the top, for safety reasons. The water
tank cannot be filled with more than the maximum capacity of the coffee
pot, so it cannot overflow during the brewing process.
8. Close the lid.
9. Pace the pot with the lid closed on the plate.
10. Press the "EIN/AUS" button.
11. The indicator lamp in the "EIN/AUS" button lights up red and the brewing
cycle begins.
12. When the brewing cycle is complete, switch the appliance off by pressing
the "EIN/AUS" button two times consecutively. If you do not push the „EIN/
AUS" button twice after the brewing process has finished, the appliance will
be automatically turned off after 5 minutes.
13. Pour out the water from the first brewing cycle.
14. Remove the pot and the filter.
15. The appliance is now ready for operation and you can start brewing coffee.
26
Copyright UNOLD AG | www.unold.de