Parts Description - Lavorwash INDEPENDENT 2000 Manual De Instrucciones

PARTS DESCRIPTION

EN
The main parts of engine are located as follows (Fig.1)
Engine switch
Dipstick
Drain plug
CONTROL CONNECTION OF REMOTE DISTANCE (OPTION)
The holes in levers of both the choke and throttle valve are used for mounting op tioned steel wires. Fig.
2, 3 & 4 shown illustrate how to mount a solid steel wire and a meshed steel wire. If choosing a Accessory
Options: meshed steel wire, a return spring is added.
If necessary, you may un screw the damping nut on the throttle valve lever slightly when controlling the
throttle valve by a remote - controlled steel wire.
Accessory options:
Stiff steel wire
Stiff steel wire
Remote-controlled throttle:
of throttle valve
26
Fuel tank cap
Fuel tank
Oil plug
Drain plug
Air cleaner
Spark plug
Muffler
Flexible
steel wire
Snap ring
Damping nut
lever
Starting
Exhausting-pipe
rope handle
Drain plug Kick-starter
Choke lever
Throttle lever
Fuel cock
4mm screw
Steel wire fixer
Throttle valve lever
Return spring
fig. 1
fig. 2
fig. 3