Digital Out - Denon DVD-2800II Manual De Instrucciones

4
®
When "PROGRESSWE MODE" is selected:
MODE 1 (level detection mode}
(Factory default)
This is a mode for high precision detection of the
source type from the level of the video signals
recorded on the DVD.
For DVDs on which the flag (identification signal)
data is recorded incorrectly, the picture quality
may decrease when flag detection is conducted.
This mode is effective in such cases.
MODE 2 (flag detection mode)
This is a mode for detecting the source type
from the source flag (identification signal)
recorded on the DVD.
In dark scenes, distinguishing between video
signals and noise signals with level detection is
difficult and the picture quality may decrease.
This mode is effective in such cases.
Remote control unit
Remote control unit
[ PROCI/ESSlVE #0_ I DENON
VIDEO MODE--> VIDEO
1
2
3
2,3, 4
See page 35.
Use the • and • cursor buttons to select the desired
setting, then press the ENTER button.
1. DIGITAL OUT
Use this to select the digital output's signal
format.
2. LPCM SELECT 196 kHz _ 48 kHz}
Use this to set the digital audio output when
playing DVDs recorded in linear PCM audio.
To exit the audio setup mode
Use the • and T cursor buttons to select "MAIN
PAGE", then press the ENTER button.
Press RETURN button, you can go back to the
previous screen.
• The screen returns to as it was in step 1.
Remote control unit
Remote control unit
s
[ ADOS UP IDENON
I ,DIGITAL OUT I L N_I_ L j
DIGITAL OUT
42