Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3
Use the • and • cursor
buttons
to select
the MP3
file you want to play, then press the PLAY button
or
ENTER button.
• Playback
starts.
The display
can be switched
between
the single
elapsed
time
and the single
remaining
time
by
pressing
the DISPLAY button.
Programmed
playback
is not possible
with
MP3
discs.
To change
the MP3 file
Press the STOP button,
then
use the •
and •
cursor buttons
to reselect
the desired
MP3 file.
8 To set the random
play mode
in the stop mode,
press the RANDOM
button.
Then press the PLAY button
or ENTER button.
To set the repeat
mode
The repeat mode changes
each time the REPEAT
button
is pressed.
NORMAL
_->TRACK REPEAT _->FOLDER REPEAT
t
I
To return
to the initial
disc information
screen
Press the STOP button,
use the • cursor button
to
select
"ROOT"
at the upper right of the screen,
then press the ENTER button.
The screen in step 1 reappears.
Remote
contro]
unit
_ISC 1_201/r_TIOPJ
I DENON
,!_FO[DER
NAME 1
L MP*.JR_NAME
]
1
PLAY MO0_
: f_Otl_}.L
SINGLEELAPS_I) :_O:OI
Main
unit
Remote
control
unit
NOTES:
• The DVD-2800
is compatible
with
the "MPEG-1
Audio Layer 3" standards
(sampling
frequency
of 32, 44.1 or 48 kHz). It is not
compatible
with
such other standards
as "MPEG-2
Audio Layer 3", "MPEG-2.5
Audio Layer 3", MP1, MP2, etc.
• It may not be possible
to play some CD-R/RW
discs due to disc properties,
dirt, warping,
etc.
• The digital signals output
when playing
MP3 files are MP3 signals converted
into PCM, regardless
of whether
the audio output
presetting
is set to "normal" or "PCM conversion".
The signals are output with the same sampling frequency
as that of the music
source.
• In general,
the higher an MP3 file's bit rate, the better
the sound
quality.
On the DVD-2800,
we recommend
using MP3 files
recorded
with
bit rates of 128 kbps or greater.
• MP3 files may not be played
in the expected
order, since the writing
software
may change
the position
of the folders
and the
order of the files when writing
them
on the CD-R/RW.
• Manual search and programmed
playback
are not possible
with
MP3 discs.
• When
writing
MP3 files on CD-R/RW
discs, select
"[SO9660
level 1" as the writing
software
format.
This may not be possible
with some types of writing
software.
For details,
refer to the writing
software's
usage instructions.
• With the DVD-2800
it is possible to display folder names and file names on the screen
like titles. The DVD-2800
can display up
to 11 characters,
consisting
of numbers,
capital letters,
and the ....
(underscore)
mark.
• If recorded
in a format other than "[SO9660
level 1 ", normal display and playback
may not be possible.
In addition,
folder and file
names including
other
symbols
will not be displayed
properly.
• Be sure to add the extension
".MP3"
to MP3 files. Files cannot be played if they have any extension
other than ".MP3"
or if they
have no extension.
(with Macintosh
computers,
MP3 files
can be played by adding
the extension
".MP3"
after the file name
consisting
of up to 8 capita[ or numbers
and recording
the files on the CD-R/RW.)
• Do not apply stickers,
tape, etc., to either the label side or the signal side of CD-R/RW
discs. If adhesive
gets on the surface of
a disc, the disc may get stuck inside the DVD-2800
and be impossible
to eject.
• The DVD-2800
is not compatible
with packet
write software.
• The DVD-2800
is not compatible
with
[D3-Tag.
• The DVD-2800
is not compatible
with play lists.
29
Tabla de contenido
