Tabla de contenido
Idiomas disponibles
Idiomas disponibles
selected unit will begin to flash on and off
again and the display will read:
RINSE
Remove any residues of pulicaff from the
blind filter and press the
key to start the rinse cycle for the unit or units
which have undergone a cleaning cycle. The
letter R will remain fixed in the display, like the
1 long coffee key. Once the rinsing
cycle of the selected unit or units has been
completed, the display will read.
MACHINE READY
If ACTIVE has been selected in the function
"DELIVER WHILE WASHING" (see function),
after the groups to be cleaned have been
selected, pressing the
key will quite the
washing mode to use the other, non-selected
units to deliver coffee.
When the washing mode is closed to make the
units not being washed available to deliver cof-
fee, the washing cycle will be shown in the top
or bottom line of the screen, according to the
choice made in the "DELIVERING TIME" menu.
If the delivering times are deactivated, the
washing process will be displayed on the bot-
tom line.
It is not possible to open the setting menu and
to switch off the machine, either manually or
automatically, during an automatic washing
cycle not in the menu (therefore, with delivering
enabled).
62
PROGRAMMING DOSES
On the S version, it is possible to programme
just hot water and steam (if necessary).
The display will read:
1 long coffee
Press
All the programmable keys will start to flash
on and off.
Press the coffee key you wish to program;
the display will read:
Followed by the dose amount already set by
the manufacturers.
Vary the dose, by pressing the buttons
By pressing the coffee key you want to pro-
gram, delivery will be started up (in the
meantime all the other keys will turn off).
Once you have the required dose, press the
continuous coffee key
The display will show the new dose amount
which can still be changed by means of the
keys
Press the
grammed dose.
Press the
ming.
The programmed coffee key will switch off.
PROGRAM. DOSES
and the display will read:
PROGRAM. DOSES
SELECT
VOLUME C.C:
.
to stop pouring.
.
key to confirm the pro-
key to cancel program-
Hot Water
Press the
button and make sure that
it lights up.
The display will read:
PROGRAM. DOSES
SECONDS X.X
The value X.X is the default setting.
Press the
the hot water delivery time.
If a new sampling is desired press the
button again.
Delivery starts. When the desired dose has
been reached press the button
The display will show the new dose value
set which can still be changed by pressing
the
keys.
Press the
key or go on to a further
selection to terminate the operation.
Press the
key to cancel programming.
The
button will turn off.
Timed steam
Press the
button and make sure it
lights up.
In those models provided with a tempera-
ture probe (optional) the control unit auto-
matically recognizes the presence of the
probe and the display will read:
PROGRAM. DOSES
STEA.TEM.
keys
to vary
again.
°C
Capítulos
Tabla de contenido
