Temperature Display; Silent Control Operation - KENMORE ELITE 790.46122 Manual Del Usuario

Estufa electrica
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Consumer Defined Control Features
FEATURE OVERVIEW

Temperature Display

Silent Control Operation

Setting Temperature Display — Fahrenheit or Celsius:
The BROIL
and CLEAN
control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to
display in Fahrenheit.
INSTRUCTIONS
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit:
1. To tell if the display is set for Fahrenheit or Celsius press and
hold the
pad. "BROIL", "550°" will appear in the display
(see Fig. 1) and continue to HOLD for 7 seconds. A beep will
then sound. If "F" appears, the display is set to show
temperatures in Fahrenheit (Fig. 2). If "C" appears, the display
is set to show temperatures in Celsius (Fig. 3).
2. Press
to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Fig. 2) or "C" (Fig. 3).
3. Press
to accept the change or press
change.
Setting Silent Control Operation
The STOP TIME
and CLEAN
feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be
programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS
To change control from normal sound operation to
silent control operation:
1. To tell if your range is set for normal or silent operation press
and hold
for 7 seconds. "DELAY" will appear and flash
in the display (Fig. 4). If ":SP" appears (Fig. 5), the control will
operate with normal sounds and beeps. If ":- -" appears (Fig.6),
the control is in the silent operation mode.
2. Press
to switch between normal sound operation and
silent operation mode. The display will show either ":SP" (Fig. 5)
or ":--" (Fig. 6).
3. Press
to accept the change or press
change.
pads control the Fahrenheit or Celsius temperature display modes. The oven
to reject the
pads control the Silent Control operation feature. The Silent Control operation
to reject the
18
PRESS
for 7seconds
or
PRESS
for 7seconds
or
DISPLAY
Figure 1
Figure 2
Figure 3
DISPLAY
Figure 4
Figure 5
Figure 6

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

790.46123790.46124790.46129790.4637

Tabla de contenido