Identification And Servicing - Grillo CLIMBER 8.22 Manual De Instrucciones

27) Never allow anyone to check the machine while you are seated at the controls with the engine
running.
IMPROPER USE TO BE AVOIDED
28) Do not allow passengers to ride on the machine.
29) Do not allow under-age children to operate it; use is prohibited to children under 16 years old.
30) Do not operate the brush cutter near to ditches or verges which could collapse under the weight
of the machine, especially when the surface is loose or wet.
31) Replace worn or damaged exhausts.
FURTHER SAFETY ADVICE
The above mentioned warnings could not be enough to avoid any risk, if the operator does not use
the present brush cutter correctly. Therefore, for your safety we give you following advices:
32) The blade is very dangerous when rotating, never put hands or feet underneath the mower deck.
33) Do not drive in reverse at high speed.
34) It is dangerous to operate the steering wheel abruptly with the engine at full power.
35) Fill the tank with fuel before starting the engine. Only refuel outdoors, always turn off the engine,
keep away from sparks or naked flames, do not smoke! Always replace the cap on the fuel tank
and those on fuel containers properly.
36) If the fuel tank has to be emptied, only do so outdoors.
37) Do not operate the brush cutter over gravel which could become sucked up and drawn into the
blade, becoming very dangerous.
38) If you have children, hide the ignition key after using the machine.
39) CAUTION: to avoid the risk of fire, keep the engine compartment, exhaust, discharge outlets,
battery, tank area and fuel pipes free from grass, leaves, dirt etc.
40) Do not store the machine inside any building where the engine fumes can reach naked flames,
sparks or bare electrical wires
Remove the implements, turn off the engine and disconnect the spark plugs:
a) before cleaning obstructed points.
b) before checking or repairing the brush cutter.
c) when the machine hits a foreign body (check the mower deck to see if it is damaged and
make repairs before you operate).
d) if abnormal vibration occurs, stop and inspect the machine. Contact the nearest authorized
service centre if you need help.
TECHNICAL ASSISTANCE
This manual provides instructions for use and basic maintenance of the brush cutter by the user. For
operations that are not described in this manual, contact the nearest authorized Grillo dealer.
SPARE PARTS
Only use original spare parts. These are the only parts that ensure safety and interchangeability.
Always quote the machine's serial number and the code number of the part to be replaced when
ordering spare parts. For engine parts, follow the indications given in the specific manual.
Climber 8.22/ Translation of the original instructions
.

IDENTIFICATION AND SERVICING

IDENTIFICATION
The brush cutter has a label on the steering
column indicating the machine's serial number.
6