Specification Chart - Porter Cable C5512 Manual De Instrucciones

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

WHAT CAN HAPPEN

• Under some conditions and duration

of use, noise from this product

may contribute to hearing loss.

Model No.

Running Horsepower

Bore

Stroke

Voltage

Hz-Single Phase

Minimum Branch Circuit Requirement

Fuse Type

Air Tank Capacity (Gallon)

Approximate Cut-in Pressure

Approximate Cut-out Pressure

SCFM @ 40 psig

SCFM @ 90 psig

* Tested per ISO 1217

Refer to Glossary for abbreviations.

Become familiar with these terms before operating the unit.

CFM: Cubic feet per minute.

SCFM: Standard cubic feet per minute; a unit of measure of air delivery.

PSIG: Pounds per square inch gauge; a unit of measure of pressure.

Code Certification: Products that bear one or more of the following marks: UL

CUL, ETL

, CETL, have been evaluated by OSHA certified independent safety

laboratories and meet the applicable Standards for Safety.

Cut-In Pressure: While the motor is off, air tank pressure drops as you continue

to use your accessory. When the tank pressure drops to a certain low level the

motor will restart automatically. The low pressure at which the motor automatically

restarts is called "cut-in" pressure.

Cut-Out Pressure: When an air compressor is turned on and begins to run, air

pressure in the air tank begins to build. It builds to a certain high pressure before

the motor automatically shuts off - protecting your air tank from pressure higher

than its capacity. The high pressure at which the motor shuts off is called "cut-out"

pressure.

Branch Circuit: Circuit carrying electricity from electrical panel to outlet.

RISk FROM NOISE

SAVE THESE INSTRUCTIONS

FOR FUTURE USE