Removing And Installing The Doors - Haier HRF-800DGS8 Manual Del Usuario

Fig.5-4
Hinge cover
Fig.5-5
Fig.5-6
Fig.5-7

Removing and Installing the Doors

In the event that you need to remove the appliance doors,
please follow the door removal and installation instructions
below.
Before any operation, first switch off the appliance and then
unplug it from the mains or disconnect the electrical power
supply.
The Freezer Door
1.
2.
3.
The Fridge Door
1.
2.
3.
Refitting the Door
Refit the doors by reversing the removal steps. Ensure that
Hinge cover
the grounding cable will be fixed by the screw (Fig.5-7).
17
Never place the appliance horizontally on the ground.
It is suggested, for your safety, to have two or more peo-
ple to assist you in completing the below task to avoid
injury, product damage or property loss.
Undo the hinge cover screw and remove the cover
(Fig.5-4). Release the cable connector.
Undo the screws holding the upper hinge in position and
then remove the hinge (Fig.5-5).
Lift the freezer compartment door to remove it.
Undo the hinge cover screws and remove the cover
(Fig.5-6). Release the cable connector.
Undo the screws holding the upper hinge in position and
then remove the hinge (Fig.5-7).
Lift the refrigerator compartment door to remove it.