Security Settings; About Security Settings; Device And Sim Card Security; Restore Original Settings - Nokia E Serie Manual De Uso

Security settings

About security settings

Select Menu Control panel
>
Security.
Define the following security settings:
Phone and SIM card
•
your device and SIM card.
Certificate management
•
certificates.
Security module — Manage your security module.
•
Avoid using codes that are similar to emergency numbers to
prevent accidental dialing of the emergency number. Codes
are shown as asterisks. When you change a code, enter the
current code, then the new code twice.

Device and SIM card security

To change the PIN code, select
code. The new code must be 4 to 8 digits long. The PIN code
protects your SIM card against unauthorized use and is
provided with the SIM card. After three consecutive incorrect
PIN code entries, the code is blocked and you need to use the
PUK code to unblock it before you can use the SIM card again.
To set the keypad to lock automatically after a defined period,
select Phone and SIM card
To set a time-out after which the device is automatically
locked and can be used only if the correct lock code is entered,
select Phone and SIM card
a number for the time-out in minutes or select
© 2008 Nokia. All rights reserved.
Settings and General
>
— Adjust the security settings for
— Manage your security
Phone and SIM card
Keypad autolock
>
Phone autolock period. Enter
>
None
off the autolock period. When the device is locked, you can
still answer incoming calls, and calls may still be possible to
the official emergency number programed into your device.
To set a new lock code, select
>
code. The preset lock code is 12345. Enter the current code
and then the new code twice. The new code can be 4-255
characters long. Both alphabets and digits can be used, and
both uppercase and lowercase alphabets are possible. The
device notifies you if the lock code is not properly formatted.

Restore original settings

To restore the original device settings, select
Control panel
settings. To do this, you need your device lock code. After
resetting, the device may take a longer time to power on.
Documents, contact information, calendar entries, and files
are unaffected.
PIN
>

Positioning settings

Select Menu
Positioning.
To use a specific positioning method to detect the location of
your device, select
period.
To select a positioning server, select
To define the measurement system and coordinate format
for location notations, select
to set
Phone and SIM card
Settings and General
>
Control panel Settings
> >
Positioning methods.
Positioning
Notation
Settings
Lock
>
Menu
>
Factory
>
and General
>
server.
preferences.
149