Configuration; Wlan Security Settings; Wep Security Settings; Wep Key Settings - Nokia E Serie Manual De Uso

Settings
To edit the settings manually, select

configuration

> Disabledand define the following:
Long retry limit — Enter the maximum number of
•
transmission attempts if the device does not receive a
receiving acknowledgement signal from the network.
Short retry limit — Enter the maximum number of
•
transmission attempts if the device does not receive a
clear-to-send signal from the network.
RTS threshold
— Select the data packet size at which the
•
WLAN access point device issues a request to send before
sending the packet.
TX power level — Select the power level of your device
•
when sending data.
Radio measurements
•
measurements.
Power saving — Select whether to use the WLAN power
•
saving mechanism to save the power in the device battery.
Using the power saving mechanism enhances the battery
performance but may weaken WLAN interoperability.
To restore all settings to their original values, select
Options Restore defaults.
>

WLAN security settings

Select Menu Control panel
>
Connection Destinations
>
the instructions on the display.
To edit a wireless LAN (WLAN) access point, open one of the
access point groups, and select an access point marked with
.
156
Automatic
— Enable or disable the radio
Settings and
>
Access point, and follow
>
To enter the settings for the selected security mode, select
WLAN security settings.

WEP security settings

Select WEP as the WLAN security mode.
The wired equivalent privacy (WEP) encryption method
encrypts data before it is transmitted. Access to the network
is denied to users who do not have the required WEP keys.
When the WEP security mode is in use, and your device
receives a data packet not encrypted with the WEP keys, the
data is discarded.
In an ad-hoc network, all devices must use the same WEP key.
Select WLAN security settings
WEP key in use — Select the desired WEP key.
•
Authentication type
•

WEP key settings

— Edit the settings for the WEP key.
•
WEP key settings
In an ad-hoc network, all devices must use the same WEP key.
Select WLAN security settings
from the following:
WEP encryption — Select the desired WEP encryption key
•
length.
WEP key format — Select whether you want to enter the
•
WEP key data in ASCII
WEP key — Enter the WEP key data.
•
and from the following:
— Select Open or Shared.
WEP key settings
>
or Hexadecimal format.
© 2008 Nokia. All rights reserved.
and