Tabla de contenido
Should prosthetic components be subjected to unusual stresses (such
as a fall), immediately contact your prosthetist and have the components
inspected for any damage. If necessary, the responsible prosthetist will
pass the prosthesis on to the Ottobock Service.
NOTICE
Risk of corrosion. Prosthetic components must not be exposed to cor-
rosive elements such as fresh water, salt water and acids.
Using this medical device in such environmental conditions will render
all claims against Otto Bock HealthCare null and void.
NOTICE
Risk of damage due to incorrect environmental conditions. Prosthetic
components must not be subjected to intense smoke, dust, vibrations,
shocks or high temperatures. Do not allow debris or liquids to get into
the prosthesis and its components. Failure to follow these instructions
can lead to malfunctioning and damage to the prosthesis.
NOTICE
Risk of damage caused by improper cleaning agents. The use of ag-
gressive cleaning agents must be avoided. They may cause damage to
bearings, seals and plastic parts. The product may only be cleaned with
a damp cloth and mild soap.
2.4 Function
The MovolinoArm Friction is available in one size. The elbow component can
be used for both right and left-side fittings. It is suitable for children ages 3-5.
The MovolinoArm Friction has one friction setting for humeral rotation and
one for flexion / extension of the forearm.
Extension / flexion starts at 0 – 5° pre-flexion. The forearm can be flexed by
a maximum of 140°. The terminal flexion / extension stops are dampened.
The friction can be adjusted via the adjustment screw using the Allen key
(wrench size 3 mm) included in the scope of delivery. Adjustment should
be performed at maximum flexion (fig. 1) or maximum extension (fig. 2) of
14 | Ottobock
Tabla de contenido
