Cleaning The Appliance - Unold 28605 Instrucciones De Uso

"I/O" switch once. If you do not switch off
the appliance manually, it will switch off
automatically after two hours.
12. The coffee jug may be removed at any time
during the brewing process to serve coffee,
but must be replaced on the hotplate after
max. 20 seconds to avoid the filter from
overflowing.
Brewing coffee with the program function
1. Please first check that the time is correctly
set. Only then will the timer be able to work
as required (see section "Setting the time"
on page 17).
2. Prepare the appliance, as described under
"Before using the appliance for the first
time" on page 17.
3. Open the lid of the appliance.
4. Fill the water tank with enough clear, cold
water for the required number of cups,
taking care not to exceed the maximum
capacity (marker "12").
5. Make sure that the filter holder has been
correctly inserted into the appliance. The
filter holder can only be inserted in one
direction.
6. Fold over the bottom edge of the paper filter
and place it directly in the filter holder. The
paper filter must not protrude over the top of
the filter holder. If it does protrude over the
top of the filter holder, you will have to fold
it over several times until it fits.
7. Spoon the required amount of medium
fine ground coffee (5-7g per cup according
to taste) into the paper filter. If the coffee
ground is too fine, it could clog up the pores
of the filter and cause the coffee maker to
overflow.
8. Close the lid of the appliance.

cleaning the appliance

1. allow the appliance to cool before cleaning it.
2. Before cleaning, always turn off the appliance
and unplug it from the power supply.
3. Do not immerse the appliance and power
cord in water or other liquids or wash them
in the dishwasher.
4. Open the lid of the appliance and remove
the permanent filter. Dispose of the coffee
grounds.
5. Condensation can collect above the filter.
After brewing coffee, wipe off the bottom of
the lid with a dry cloth.
18
13. Disconnect the appliance from the mains
supply if necessary.
14. Once the appliance has cooled down,
remove the permanent filter and dispose of
the coffee grounds.
9. Place the coffee jug with its lid closed onto
the hotplate.
10. Hold down the "PROG" button. The digits in
the display will start blinking.
11. With the other hand, press the "H" and "M"
buttons to set the required brew start time.
12. On releasing the "PROG" button, the
current time will be displayed again.
13. Now press the "PROG" button once. The
green indicator lamp in the button will light
up.
14. Brewing will start automatically at the pre-
set time.
15. Once the brewing process has finished,
switch off the appliance by pressing the
"I/O" switch once. If you do not switch off
the appliance manually, it will switch off
automatically after two hours.
16. The coffee jug may be removed at any time
during the brewing process to serve coffee,
but must be replaced on the hotplate after
max. 20 seconds to avoid the filter from
overflowing.
17. Disconnect the appliance from the mains
supply if necessary.
18. Once the appliance has cooled down,
remove the permanent filter and dispose of
the coffee grounds.
6. Wipe off the housing and the plate with
a damp cloth and a little dishwashing
detergent. Do not use any abrasive scouring
agents, steel wool, metal objects, hot
cleaning agents or disinfectants, since they
can damage the appliance.
7. Clean the pot, its lid, the filter holder and
filter in water with a little dishwashing
detergent added.
8. The appliance must be completely dry
before you use it again.