Beko DRYPOINT M PLUS Instrucciones De Instalación Y Servicio página 10

Instructions for installation and operation
10 DRYPOINT DM 10-34 C-N, DM 10-41 C-N, DM 10-47 C-N, DM 20-48 C-N, DM 20-53 C-N, DM 20-60 C-N, DM 20-67 C-N,
WARNING!
Risk of injury in the event of
operation of device by insuffi-
ciently qualified personnel!
Improper use might result in serious injury
and/or damage to property. All of the ac-
tivities and tasks described in this docu-
ment must be carried out by qualified per-
sonnel who have the qualifications listed
below.
Qualified personnel
Due to their specific training and experi-
ence, and their knowledge of the country-
specific provisions, standards and statu-
tory regulations, qualified personnel are
capable of carrying out the described
tasks and are able to independently iden-
tify potential risks. Special operating con-
ditions might require additional knowledge
and skills, for instance with regard to the
handling of aggressive/corrosive media.
NOTE!
Ambient conditions
Do not install the device outdoors or in ar-
eas where frost is likely to occur. Do not
install the device in areas with a potential-
ly explosive atmosphere. Do not operate
the device with flammable media.
Prior to reading this document,
please ensure that it is the val-
id manual for your device. Read
these installation and operat-
ing instructions carefully prior to
any intervention regarding the
membrane dryer. A copy of the op-
erating instructions must be ac-
cessible at all times near the de-
vice.
If you have any queries regarding
these instructions, please contact
BEKO TECHNOLOGIES.
DM 40-61 C-N, DM 40-75 C-N, DM 40-90 C-N
US-EN