Displaying The Serial Number (Serial Number); Error Table - Blaupunkt Memphis MP66 Instrucciones De Manejo E Instalación

Error table

You can adjust scan times in in-
crements of 5 seconds form 5 to
30 seconds.
Displaying the serial number
( Serial Number)
Every device has a separate serial
number. To display this number:
Error table
If the device does not function properly, switch the device off and on
again.
If problems still persist, you can easily correct the following problems.
Problem
The menus do not appear
as shown in these instruc-
tions.
The tuner cannot be adjust-
ed to the frequencies listed
in the technical data.
The display shows informa-
tion about the device.
The device is always silent,
even though it is correctly
connected.
If problems still persist, please contact an authorised workshop or the
Blaupunkt customer service (see the last page).
56
➔
Press the softkey
"Serial Number").
The serial number is displayed.
Possible cause
The device is not set to
your region.
The demo mode is acti-
vated.
The internal amplifi er is
switched off.
: (next to
Possible remedy
Set the device to your region
as described on page 26.
Briefl y press the MENU-
?
button , then press the
?
MENU button again and
hold it pressed for four sec-
onds.
Switch on the internal
amplifi er as described
on page 55.