Ec Declaration Of Conformity - Scheppach cs 55 Serie Traducción Del Manual De Instrucciones Original

Sierra de incisión

Tabla de contenido

Idiomas disponibles

Accessories

RAIL

m Maintenance

If specialist personnel must be brought in for extraordinary

ser vice or repairs during the warranty period and thereaf-

ter, please contact a service provider recommended by us or

con tact the manufacturer directly.

• Overhauls, maintenance work, cleaning, as well as the

eli mi nation of any malfunctions must only be under-

taken af ter turning off the motor.

• All protective and safety equipment must be rein-

stalled immediately upon completion of any repair or

maintenance work.

ReguLAR MAInTenAnCe

The regular maintenance decribed above and in the para-

graph below can be carried out by unskilled personnel.

• Do not oil the plunge cut saw, cause cutting must be

carried out in dry conditions; all rotating parts are

self-lubricating.

• During maintenance, wear protective gear if possible

(accident-prevention goggles and gloves).

• Remove cuttings when necessary both from the cutting

area, work surfaces and support bases.

Use of an aspirator or brush is recommended.

ATTenTIon: Do not use compressed air jets!

• Regularly check blade conditions: if difficulties should

arise during cutting, have it sharpened by skilled per-

sonnel or replace it if necessary.

ASSISTenCe

When in need of skilled personnel for special main-

tenance, or for repairs, both during and following the

guarantee pe riod, always apply to authorized centres for

assistance or directly to the manufacturer if there is no

authorized centre in your area.

DISPoSAL oF THe MACHIne.

Once its operating activity is finished, the disposal of the

machine must take place through a normal collection and

disposal Center for industrial waste.

herewith

1400 MM

Holzbearbeitungsmaschinen GmbH, Günzburger Str. 69, D-89335

Ichenhausen

that the machine described below due to its con struc tion and design

and in the version delivered by us complies with the relevant provisions

of the following EC Directives.

In case of a modification of the machine this declara tion ceases to

be valid.

Benificary: Werner Hartmann

Machine description:

Plunge cut saw

Circular saw, hand held

to saw wood with an appropriate saw blade

Machine type:

cs 55,

Art.-nr.

490 1802 918

Applicable EC Directives:

eC machine directive 2006/42/eC,

eC Low voltage directive 2006/95/eC,

eC-eMv directive 2004/108/eC.

Applied harmonized European standards, especially

en 60745-1, en 60745-2-5, en 55014-1, en 55014-2, en 61000-3-

2, en 61000-3-3, en 55014-1/A2:2002, en 61000-3-3/A2:2005, en

610003-3/A2:2005, en 61000-3-11:2000, en 55014-2/A1:2001, en

61029-2-9:2002

Place, date:

Ichenhausen, 02.05.2011

Handtekening:

Werner Hartmann (Head of Technical Innovation)