Intended Use; Technical Data; Machine Features - Festool HK 55 EBQ Manual De Instrucciones

CAUTION
Noise generated when working
Risk of damage to hearing
► Use ear protection.
Vibration emission level a
three directions) and uncertainty K measured in
accordance with 62841:
Sägen von Holz
Sägen von Metall
The specified emission levels (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
– They represent the primary applications of
the power tool.
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
► The actual load during the entire operating
cycle must be evaluated.
► Depending on the actual load, suitable pro­
tective measures must be defined in order
to protect the operator.
3

Intended use

Portable circular saw designed for sawing
– wooden materials and wood-based materi­
als,
– plaster and cement compoud fibres,
– plastic materials,
– aluminium (only with a special saw blade
for aluminium offered by Festool)
Only saw blades with the following
specifications can be used:
– saw blades according to EN 847-1
– saw blade diameter 160 mm
– recommended cutting width 1,8 mm, max.
2.2 mm with restricted function of guide
wedge
– locating bore 20 mm
– recommended steel blade thickness
1,5 mm, max. 1.8 mm
– suitable for speeds up to 9500 rpm
(vector sum for
h
a = < 2.5 m/s
2
h
K=3 m/s
2
a = 3.0 m/s
2
h
K = 3 m/s
2
-1
Never use machine with any abrasive wheels.
Only saw materials for which the relevant saw
blade has been designed.
This power tool may only be used by experts or
instructed persons.
The user is liable for improper or non-in­
tended use.
4

Technical data

Portable circular saw
Power
No-load speed
Inclination
Cutting depth at 0°
Cutting depth at 50°
Saw blade measurement
Weight (without mains ca­
ble)
5

Machine features

[1-1] Handles
[1-2]
Switch-on lock
[1-3] Lever for changing blades
[1-4]
Retractor lever for pendulum guard
[1-5] Guide wedge
[1-6] Pendulum guard
[1-7] On/Off switch
[1-8] Lever for plunge function
[1-9]
Split scale for cutting depth stop
(with/without guide rail)
[1-10] Extractor connector
[1-11] Angle scale
[1-12] Knob for angle setting
[1-13] Cutting depth adjuster
[1-14] Mains power cable
[1-15] Adjustable jaws
[1-16] Speed control
The illustrations specified are located at the be­
ginning and end of the operating instructions.
English
HK 55
1200 W
2000 - 5400 rpm
0 - 50°
0 - 55 mm
38 mm
160 x 1,8 x 20 mm
4,4 kg
19