Mounting The Outlet Port (Optional); Installing The Refrigerator - Dometic CRX 1065D Instrucciones De Montaje Y De Uso

Installing and connecting the refrigerator
• Observe the installation dimensions in fig. 4, page 4.
• Keep objects clear of openings in the housing or installation structure (such as
ventilation slots, etc.).
• Condensate is produced when the refrigerator is operating normally. You can
either wipe up the condensate on the floor of the refrigerator in regular intervals,
or drain it through an outlet in the floor of the refrigerator (see chapter "Mounting
the outlet port (optional)" on page 18).
7.3

Mounting the outlet port (optional)

➤ Connect a hose with an inside diameter of 10 mm (not included) to the outlet
port.
➤ Lay the refrigerator on its side in order to access the bottom side.
➤ Mount the outlet port (fig. 5 2, page 5) aligned to the front or to the back
according to the desired outlet direction.
➤ Remove the drain plug (fig. 5 1, page 5) inside the refrigerator.
7.4

Installing the refrigerator

Proceed as follows to install the refrigerator:
➤ If you wish to drain the condensate through a hose:
Mount the outlet port (see chapter "Mounting the outlet port (optional)" on
page 18).
➤ Undo the transport lock (chapter "Releasing the lock" on page 24).
➤ Open the refrigerator drawer.
➤ Remove the blanking plugs (fig. 6, page 5).
➤ Push the refrigerator into the recess.
➤ Fix the refrigerator in place using suitable screws (fig. 6, page 5).
➤ Press the blanking plugs (fig. 6, page 5) into the openings.
18
CRX
EN