Functional Description - Makita AN634H Manual De Instrucciones

Selecting air hose
CAUTION:
Low air output of the compressor,
or a long or smaller diameter air hose in relation
to the nailing frequency may cause a decrease in
the driving capability of the tool.
Fig.3
Use a high pressure resistant air hose.
Use an air hose as large and as short as possible to
Lubrication
Fig.4: 1. Pneumatic tool oil
Oil the tool with pneumatic tool oil by placing two or
FUNCTIONAL
DESCRIPTION
CAUTION:
Before adjusting or checking func-
tion on the tool, always lock the trigger by turning
the trigger lock lever to the lock position
disconnect the air hose from the tool.
Adjusting depth of nailing
Fig.5: 1.
Fig.6: 1. 2. Flush 3.
Hook
CAUTION:
Always disconnect the hose when
hanging the tool using the hook.
CAUTION:
Never hook the tool at high loca-
tion or on potentially unstable surface.
CAUTION:
Do not hang the hook from the
waist belt.
desired angle.
Fig.7: 1. Hook
with a screwdriver and remove the nut. Install the hook
and the nut.
Fig.8: 1. Hook 2. Bolt 3. Nut
Nose adapter
arrow.
Fig.9: 1. Nose adapter
press it onto the contact element until the recessed
Fig.10: 1. Nose adapter 2.
Air duster
For Model AN635H
CAUTION:
air duster to someone. Also, keep your hands and
foot away from the ejection port.
CAUTION:
before using the air duster.
may hit someone.
CAUTION:
, and air hose while pushing the air duster button.
duster. You can clean the work area by pressing the
button on the grip end.
Fig.11: 1. Button
NOTICE:
pressure recovers in this case.
NOTICE:
may be sprayed with the air.
ASSEMBLY
CAUTION:
the tool, always lock the trigger by turning the
trigger lock lever to the lock position
disconnect the air hose from the tool.
Loading nailer
CAUTION:
linked sheet.
1. Disconnect the air hose.
2. Depress the latch lever and open the door and
Fig.12: 1. Latch lever 2. Door 3.
Fig.13
10 ENGLISH
3. Protrusion 4. Recessed part
Do not aim the ejection port of the
Always check your surroundings
Do not connect or disconnect the
Before carrying out any work on
Do not use deformed nails or
-
, and