Lighting; Replacement Parts And Accessories - Turbo CREO SL Manual De Usuario

12.18
CARBON FRAMES: To attach the rack at the top, on carbon frames, you need to upgrade your bicycle with our
„
dedicated "SEAT CLAMP WITH RACK MOUNT" (Fig 12.18) (Service Part Number: S184700001). The horizontal
rack struts attach to the seat collar to stabilize the rack.
ALLOY FRAMES: The horizontal rack struts attach to the seatstay bridge insert (Fig. 12.19).
„
Check with your Authorized Specialized Retailer for advice on compatible racks for your bicycle.
When loading your rack, do not exceed the cargo weight limits stated in the Owner's Manual Appendix A
(RIDER/BIKE WEIGHT LIMITS AND TERRAIN CONDITIONS).
Through your Authorized Specialized Retailer, your Creo SL can be upgraded with a light splitter cable that adds
connections for front and rear lights (Service Part Number: S206800003). It connects to the TCU inside the top
tube and provides the following output data: 12V only, 8W / 650 mA max. Note that your Creo frame allows easy
routing of the front light cable only. There is no dedicated exit port for a rear light cable, We recommend using a
battery powered rear light like our Flux or Stix taillights. The installation of wired lights should be performed by your
Authorized Specialized Retailer.
Specialized replacement parts and accessories are available through your Authorized Specialized Retailer.

12.4. LIGHTING

12.5. REPLACEMENT PARTS AND ACCESSORIES

12.19
38