Dust Extraction; Working With The Machine - Festool TSC 55 REB Manual De Instrucciones

English
Only use the rotary knob supplied with
your plunge-cut saw. The rotary knob of
another saw may be too long and jam the saw
blade.
You must bed in the splinter guard before using
it:
► Set the machine to maximum cutting depth.
► Set the machine speed to 6.
6
6-1
8.7

Dust extraction

WARNING
Heath hazard posed by dust
► Always work with an extractor.
► Comply with national regulations.
Independent extraction
► Secure the connection piece [7-2] of the
dust collection bag [7-3] at the extractor
connector [7-1] with a clockwise rotation.
► To empty remove the connection piece [7-2]
of the dust collection bag from the extractor
connector [7-3] with an anti-clockwise rota­
tion [7-1].
16
6-4
6-3
6-2
7a
2
1
Festool mobile dust extractor
A Festool mobile dust extractor with an extrac­
tor hose diameter of 1-1/16" (27 mm) or 1-7/16"
(36 mm) (36 mm recommended due to the re­
duced risk of clogging) can be connected to the
extractor connector [7-1]
The adapter on a suction hose Ø 27 mm is in­
serted into the angle adapter [7-4]. The adapter
on a suction hose Ø 36 mm is inserted over the
angle adapter [7-4].
Static charge may occur if an anti-static suction
hose is not used. The user may suffer an elec­
tric shock.
7b
9

Working with the machine

Please observe all mentioned safety in­
formations and the following rules when
working:
– Only guide the power tool towards the
workpiece when it is switched on.
– Check the installation fixture prior to use
and do not use the machine if the fixture
does not function correctly.
7-1
7-2
1
7-3
2
7-4