Before You Begin; Tools And Parts Needed; Parts Included; Appliance Dimensions - Gaggenau AW 230 790 Instrucciones De Uso Y Montaje

Before you begin

Tools and parts needed

▯
Measuring tape
▯
Pencil
▯
Phillips screwdriver (Posidrive) #2
▯
Screwdriver T25
▯
Screwdriver T15
▯
Drill with the following bits: 5/16" (8 mm)
▯
Spirit-level
▯
Aluminum tape (DO NOT use insulating tape)
▯
Exhaust channel (configuration depends on the
installation situation)
▯
Additional sheet metal screws (if necessary for
installation of the exhaust air duct)
▯
Saw

Parts included

B e f o r e y o u b e g i n

Appliance dimensions

▯
This appliance is installed on the wall.
▯
Check the position of the screws using the
enclosed template.
▯
Follow the enclosed installation instructions for
additional special accessories (e.g. for
circulating-air mode).
▯
The surfaces of the appliance are sensitive.
Avoid damaging them during installation.
17