Ottobock 743L500 3D L.A.S.A.R. Posture Instrucciones De Uso página 88

Use
Can the force measurement plate be wet cleaned?
•
Wet cleaning is possible as described in the section "Cleaning" (see Page 101).
• Can additional markings be applied to the force measurement plate?
The force measurement plate is marked with orientation lines for patient alignment. Colour markings and stickers
may be applied to the plastic edge, provided they are not highly reflective and do not cover the LEDs.
What is the maximum permissible patient weight?
•
200 kg
Mini-computer
• What does the beep mean after turning on the mini-computer?
The beep tells you that the mini-computer has been turned on and the operating system is booting up.
How can I tell that the mini-computer has booted up?
•
Some time after the mini-computer is turned on (about one minute), all four LEDs on the force measurement plate
flash at the same time at least twice. A WiFi network with "3DLASAR" in the SSID (name) is visible to WiFi-cap­
able devices (such as telephones, laptops, tablets).
Tablet
Can a different tablet be used?
•
In order to ensure the reliability of the product as a measuring device, only the supplied tablet may be used.
• Can the tablet be used without the micro-SD card?
No, the patient database is stored on the micro-SD card.
Can the tablet be used for e-mail?
•
This is not possible because connecting the tablet to the internet is not permitted. Only Bluetooth or the USB cable
may be used for transferring data.
Can the images be sent and printed from the tablet?
•
The images cannot be exported directly. However, two formats are provided for the export of images and patient
data:
1. PDF files
2. Data Station files
Bluetooth or the USB cable is used for data transfer to a computer. The data can be printed using a PDF viewer or
the Ottobock Data Station.
Software
Are software updates provided? How do you find out about them?
•
Ottobock informs you of software updates and provides detailed installation instructions.
The information is sent by e-mail.
Is installing a new operating system for the tablet permitted?
•
Installing a new operating system may lead to problems with the app. Therefore, an operating system update may
only be installed when Ottobock instructs you to do so. Otherwise update reminders and installation messages on
the tablet may not be confirmed and carried out.
• What happens if the "3D L.A.S.A.R. Posture" app is deleted?
NOTICE! Deleting the app erases the database on the micro-SD card.
Installing the app (only by request and according to the instructions of Ottobock)
1. Enable access to the Internet via a WiFi connection.
2. Open the "Play Store" app.
3. Use an existing or new Google account to log in.
4. Enter "ottobock 3D" in the search field and start the search.
5. Start the installation of the "3D L.A.S.A.R. Posture" app and confirm the access rights requested by the app.
"3D L.A.S.A.R. Posture" app
Is the app available in my national language?
•
The app is available in German and English. Ottobock informs customers when additional languages become avail­
able.
What are the QR code and activation code needed for?
•
The codes are needed to connect the mini-computer to the tablet during setup. Without this connection the "3D
L.A.S.A.R. Posture" app is not functional.
88 743L500 3D L.A.S.A.R. Posture