Ottobock 743L500 3D L.A.S.A.R. Posture Instrucciones De Uso página 105

Magnetic field with supply
frequency (50/60 Hz)
according
IEC 61000-4-8
NOTE: U is the mains voltage before applying the test levels.
T
Directives and manufacturer's declaration – electromagnetic interference immunity
The 743L500 3D L.A.S.A.R. Posture is intended for operation in the electromagnetic environment specified
below. The customer or user of the 743L500 3D L.A.S.A.R. Posture must ensure that the device is operated in
such an environment.
INTERFERENCE
IMMUNITY TESTS
Conducted HF interfer­
ence according
IEC 61000-4-6
Radiated HF interference
according
IEC 61000-4-3
NOTE 1: The higher value applies at 80 MHz and 800 MHz.
NOTE 2: These directives may not be applicable in all cases. The propagation of electromagnetic factors is influ­
enced by absorption and reflection by buildings, objects and people.
743L500 3D L.A.S.A.R. Posture
3 A/m
to
IEC 60601 test level
3 V
eff
to 150 kHz to 80 MHz
3 V/m
80 MHz to 2.5 GHz
to
< 5 % U
T
(> 95 % drop of U ) for 5 s
T
3 A/m
Compliance level
3 V
3 V/m
Technical data
Magnetic fields at
mains frequency should be
equivalent to the typical
levels for commercial or
hospital environments.
ELECTROMAGNETIC
ENVIRONMENT – Direct­
ives
Portable and mobile wire­
less equipment should not
be used at a lesser dis­
tance from the 743L500
3D L.A.S.A.R. Posture,
including the lines, than
the recommended safety
distance calculated using
the equation applicable for
the transmission
quency.
Recommended safety
distance:
d = 1.2√P
d = 1.2√P for 80 MHz to
800 MHz
d = 2.4√P for 800 MHz to
2.5 GHz
where P is the nominal out­
put of the transmitter in
watts (W) according to the
transmitter manufacturer
and d is the recommended
safety distance in metres
(m). The field strength of
stationary radio transmit­
ters at all frequencies
according to an on-site
a
investigation should
less than the compliance
b
level.
Interference is possible in
the vicinity of devices that
bear the following symbol.
the
fre­
be
105