Adjustment Tips For The Operating Menu - Sennheiser EM 3731 Instrucciones De Uso

The operating menu
B.Ch
U.01
776 866
UHF MHz
save
DEV 790.800
M
H
z
sync
03.03
BANK
AF COM
esc
CH
1.
790.800
MHz
save
DEV 790.800
M
H
z
sync
03.03
BANK AF
COM
esc
CH
Freq. occupied
1.
790.800
MHz
28

Adjustment tips for the operating menu

The following adjustment tips apply to the operating menus of all
receivers of the EM 3731/3732 receiver family.
Setting the receiving frequency
Tune Via the "Tune" menu, you can:
set the receiver to a receiving frequency that can be freely selected
within the preset frequency range. The receiving frequencies are
tunable in 5-kHz increments within the switching bandwidth of
90 MHz max. If you want to use a receiving frequency from the
enclosed frequency tables instead, see "Selecting a frequency bank and
a channel" on page 28.
change and store the receiving frequencies in the 60 channels of the
frequency bank "U" (see page 29)
Change to the setting mode of the "Tune" menu.
790.
The first three digits of the receiving frequency start flashing.
800
MHz
Change the first three digits of the receiving frequency by turning the
7
jog dial .
Confirm the first three digits of the receiving frequency by pressing the
digital audio
processing
7
jog dial .
sync
The last three digits of the receiving frequency start flashing.
Change the last three digits of the receiving frequency by turning the
7
jog dial .
After you have selected the six digits of the receiving frequency, press
the save button
The selected receiving frequency is set and automatically stored on the
channel "01" of the frequency bank "U", i.e. the previously stored
frequency is overwritten. The display changes to the selection mode of
the operating menu.
Selecting a frequency bank and a channel
B.Ch Via the "B.Ch" menu, you can select a frequency bank and a channel from
the enclosed frequency tables.
Change to the setting mode of the "B.Ch" menu.
B.Ch
The number of the frequency bank starts flashing.
Select the desired frequency bank by turning the jog dial
Confirm the frequency bank by pressing the jog dial
The number of the channel starts flashing.
digital audio
processing
Select the desired channel by turning the jog dial
sync
Note:
If during the last scan channels were detected that were occupied or
B.Ch
subject to interference, these channels are marked with a warning
triangle and the text
After you have selected the frequency bank and the channel, press
the save button
8
.
"Freq. occupied" in the "Tune" menu.
8
.
7
.
7
.
7
.