Connecting The Headphones/Adjusting The Volume; Deactivating The Lock Mode - Sennheiser EM 3731 Instrucciones De Uso

Using the receiver
RF % DEV
A B
300
PEAK
True Diversity Receiver EM 3732
100 100
30
50
10
μV 10
790.800
RF % DEV
A B M
H
300 PEAK
z
100 100
03.03
BANK
AF COM
30
esc
50
CH
10
μV 10
Hold esc to unlock
20

Connecting the headphones/adjusting the volume

CAUTION! Danger of hearing damage!
Listening at high volume levels for long periods can lead to
permanent hearing defects.
Set the volume for the connected headphones to the
minimum before putting the headphones on.
The EM 3731 single receiver features a headphone output
receivers of the EM 3732 or EM 3732 Command twin receiver have a
common headphone output
you to either monitor the audio signal of one receiver or to simultaneously
monitor the audio signals of both receivers.
Set the headphone volume control
it to the left as far as possible.
790.80
03.03
B
C
Connect headphones with a ¼" (6.3 mm) stereo jack plug to the
headphone output
To monitor the audio signals of one of the two receivers of a twin receiver:
save
Press the headphone button
sync
want to monitor.
To simultaneously monitor the audio signals of both receivers of a twin
receiver:
Simultaneously press the headphone buttons
The audio signals of the left receiver are output via the left headphone
channel, the audio signals of the right receiver are output via the right
headphone channel.
Increase the volume gradually.
To switch the headphone output off:
Press the headphone button
output you want to switch off.

Deactivating the lock mode

When the receivers are remote controlled via a PC and the supplied
"Wireless Systems Manager" software, their buttons can be locked via the
"Wireless Systems Manager" software.
To deactivate the lock mode:
Press the esc button
status display appears.
The lock mode is deactivated and the settings can be made manually.
2
. This common headphone output
3
to the lowest volume by turning
2
.
0
of the receiver whose audio signals you
0
of the receiver whose headphone
6
until the progress bar is complete and the
2
. The two
2
allows
0
of both receivers.