Working With The Operating Menu - Sennheiser EM 3731 Instrucciones De Uso

790.800 M
H
z
03.03 BANK
AF
CH
790.
800
MHz
Tune
790.
800
MHz
Tune
B.Ch
U.01
776 866
UHF MHz
B.Ch
3.01
450 950
UHF MHz
clock
save
0.800
M
H
z
sync
.03
BANK AF
COM
esc
CH

Working with the operating menu

By way of example of the "Tune" menu, this section describes how to use
the operating menu.
After switching the receiver on, the status display is shown on the display
panel.
COM
Getting into the operating menu
Press the jog dial.
B.Ch
The status display is replaced by the operating menu.
1.01
The "Tune" menu is displayed together with its current setting. The
Bank
position of a menu within the operating menu is illustrated by a graphic
in the upper display margin (the "Tune" menu is on the very left of the
operating menu).
Selecting a menu
Turn the jog dial
B.Ch of the display.
1.01
Bank
Press the jog dial
790.
The icon of the menu is displayed and the current setting starts
800
MHz
flashing. In addition, the green backlighting of the
flashes.
Adjusting a setting
Turn the jog dial
776.
866
Press the jog dial
MHz
Depending on the selected menu, it is possible that the next setting
that can be changed and confirmed by turning and pressing the jog
7
dial can start flashing.
Storing a setting
Press the save
An animation appears on the display, indicating that the setting has
been stored. The display then changes to the selection mode of the
operating menu.
Exiting the operating menu/cancelling an entry
You can exit the operating menu or cancel an entry at any time.
Press the esc button
An animation appears. The display then returns to the previous menu
level. To return to status display, you may have to press the
6
esc button several times in succession.
7
until the icon of the desired menu is in the center
7
to get into the setting mode of the selected menu.
7
until the desired setting appears.
7
to confirm the selected setting.
8
button to store the setting.
6
.
The operating menu
8
save button
23