Sennheiser EM 3731 Instrucciones De Uso página 59

Low Batt
AF
COM
AF
COM
Transmitter battery status display
The 6-step transmitter battery status display
the transmitter's remaining battery/accupack capacity:
Number of segments
(Low Batt)
Note:
If no battery/accupack status signal is received, the battery status
display is not shown.
When the battery/accupack is almost empty, text "Low Batt" flashes in
alternation with the status display. In addition, the warning triangle for
5
indicating error states lights up red.
Command display (status display of the audio outputs AF and COM)
The command display is only available with the EM 3732 Command twin
receiver.
Besides the two audio outputs
receiver also features two command outputs
Via the "Command" menu, you can configure the receiver so that – with
the command button of the transmitter pressed – the audio signal is
available at only one of the outputs or at both (see "Configuring the audio
outputs of the EM 3732 Command twin receiver" on page 32).
¾
The command display
mitter's audio signal is available.
When "AF" lights up brightly, the audio signal is available at the audio
K M
output or .
If the "AF" symbol does not appear, the audio signal is
K M
audio output or .
When "COM" lights up brightly, the audio signal is available at the
J L
command output or .
If the "COM" symbol does not appear, the audio signal is
J L
command output or .
Indications and displays
º
provides information on
Capacity
Accupack Battery
approx. 100 % full
approx. 80 % -
approx. 60 % half-full
approx. 40 % -
approx. 20 % -
approx. 0 % almost empty
K M
and , the EM 3732 Command twin
J L
and
shows the audio output at which the trans-
.
not issued on the
not issued on the
11