ESAB PCC-14 Manual De Instrucciones página 31

SEcTIoN 2
2 . Remove the side panel of the ESP-200 and thread torch lines from the
plumbing box through the bushing at middle right side of front panel
and proceed as follows:
a . Insert pilot arc adapter into left hand threaded pilot arc fitting .
b . Connect coolant return hose (male left-hand thread) to the adapter .
Pilot arc adapter
(P/N 0558009992)
Pilot Arc Cable
Pilot arc fitting
c . Connect pilot arc cable to one of 3 threaded holes on the outside
of adapter with supplied screw .
d . Connect coolant supply/power cable to fitting labeled "TORCH" .
Coolant Supply/electrode
cable connection
DEScRIPTIoN / INSTallaTIoN
31
Thread torch lines through
bushing .